The Telebeam procedure is a revolutionary new way of organising the conversion of a truss (or trussed rafter) roof into a usable area. Not only will this strategy of loft conversion give you an extra area, or rooms, but it will also add worth to your residence.
Conventional approaches of converting a trussed rafter roof entail changing the ‘W’ sections of trusses with steel joists which typically operate amongst load bearing gable walls. New vertical supporting timbers and flooring joists are then run from these metal joists to help the existing roof prior to the inner trusses is taken off. Faulkner Party Wall Surveying Portsmouth
Once the more supports are in location the ‘W’ sections of roof trusses are nearly completely eradicated. The roof trusses at the apex are typically retained in a a lot shortened state because they have to have the new horizontal ceiling joists forming the new flat region of ceiling, as perfectly as the regulation insulation resources.
As you can picture, installing lengthy steel joists into a roof that is presently ‘full’ of supporting trusses is the trickiest portion. Both a part of one particular gable finish is briefly eradicated to permit the steel to be inserted longitudinally, or spots of the roof tiles are removed and the steel joists are inserted in sections and then bolted collectively when in area.
The Telebeam procedure does absent with the require to insert sizeable load-bearing metal joists by retaining the load bearing triangulation, eave to eave, somewhat than concerning load bearing walls. With Telebeam only the a few most affordable rows of roof tiles need to be eradicated briefly. Then the roofing felt is turned back again to enable the telescopic beams to be slid in along with the existing flooring joists, attaching to the wall plates possibly side. As their title suggests, the TeleBeams are telescopic and modify to the span of the constructing. They do not count on any interior aid and get the job done for any roof pitch.
The vertical stud partitions at the edge of the new home transfer the roof load down onto the Telebeam system and the primary horizontal wood joists acquire the horizontal (spreading) load. The ‘W’ sections of roof trusses are now redundant and most of them can be removed, retaining the roof trusses at the apex to carry the new ceiling collar as before. The new floor can then be fastened directly to the Telebeam procedure, insulation can be added underfloor, concerning the rafters and within the new ceiling, and the rafters, ceiling and stud partitions can be boarded about and a plastered finish used.
TeleBeam devices are obtainable in spans up to 8.4 metres so they are ideal for just about any sizing of roof.
Benefits of the TeleBeam program:
a) Incorporates roof and floor support in 1 LABC (Neighborhood place making control) approved process.
b) Minimises loft conversion costs – the TeleBeam procedure charges about £5,000 + vat for a 2/3 bed room residence (the installation is not provided in this determine).
c) Maximises out there headroom.
d) Available in spans of 5.8, 6.2, 7., 7.8 and 8.4 metres.
e) No further timber floor joists are essential.
f) Beams slide into the roof area by eradicating just a few rows of tiles from one particular facet of the property.
g) Reduced scaffolding/obtain fees.
h) Telescopic beams match most properties and roof pitches.
i) No specialist installation skills or equipment are necessary.
j) Easy to follow, phase-by-step guidance.